Modeler 

 • Roundtrip to Allplan, IFC and others (apesa.03) 
 • Base modeller (esa.00) 
 • 2D surfaces (esa.01) 
 • Curved Surfaces (esa.02) 
 • Cut-outs of 2D members (esa.04) 
 • Productivity toolbox (esa.06) 
 • General cross-section (esa.07) 
 • Parametric input (esa.11) 
 • Intelligent link with Kiwi-Prosteel (esa.13) 
 • Intelligent link with Nemetschek-Allplan (esa.14) 
 • Pipeline Wizard (esa.15) 
 • Blocks for high voltage powermasts (esa.16) 
 • Input of pretensioned strand patterns (esa.17) 
 • Connection modeller (esa.18) 
 • Tendons (esa.20) 
 • REVIT roundtrip (esa.21) 
 • Optimisation in batch processing (esa.23)   

Analyzer 

 • Linear statics 2D (esas.00) 
 • Linear static calculation of 3D-structures (esas.01) 
 • Mobile loads frame (esas.02) 
 • Advanced mobile loads on frame (esas.03) 
 • Train loads (esas.04) 
 • Wind & Snow generator (esas.05.xx) 
 • Structure-soil interaction (soilin) (esas.06) 
 • Tension only members (esas.07) 
 • Pressure only support or soil (esas.08) 
 • Non-linear springs, gaps (esas.09) 
 • Geometrical non-linear analysis frames (esas.10) 
 • Geometrical non-linear analysis surfaces (esas.11) 
 • Cable analysis (esas.12) 
 • Stability calculation (global buckling mode) for member structures (esas.13) 
 • Stability calculation (global buckling mode) for finite elements (esas.14) 
 • Plastic hinged steel constructions (esas.15) 
 • PGNL (physical and geometric non linear) forces in concrete frames (esas.16) 
 • PNL (physical non-linear) strain calculation of concrete frames (esas.18) 
 • PNL (physical non-linear) strain calculation of concrete slabs (esas.19) 
 • TDA (Time Depending Analysis) (esas.20) 
 • Dynamics (natural frequencies) frames (esas.21) 
 • Dynamics (natural frequencies) surfaces (esas.22) 
 • Dynamics (advanced) for member structures (esas.23) 
 • Dynamics (advanced) for finite elements (esas.24) 
 • Non uniform damping frame structures (esas.25) 
 • Construction stages - linear (esas.27) 
 • Construction stages frame - non-linear (esas.28) 
 • Plane load generator (esas.29) 
 • Water accumulation according to NEN (esas.30) 
 • Pipeline supports (esas.31) 
 • Maintenance loads and SBS (esas.33) 
 • Non-linear stability analysis (esas.34) 
 • Mobile loads FEM (esas.35) 
 • Advanced mobile loads FEM (esas.36) 
 • Membrane elements (esas.37) 
 • Construction stages plates and shells - linear (esas.38) 
 • Tangential calculation pipelines (esas.39) 
 • Calculation of prestressed structures (esas.40) 
 • Friction springs (esas.42)     

Steel Designer

 • Steel code check (esasd.01.xx) 
 • Design of bolted and welded frame connections - rigid (esasd.02) 
 • Design of hinged frame connections (esasd.03) 
 • Fire resistance check (esasd.05.xx) 
 • Connections Frame - Bolted diagonals (esasd.06) 
 • Connections expert system (esasd.07) 
 • Connections Grid - Pinned (esasd.08) 
 • Powermast checks (esasd.10) 
 • Scaffolding - special checks (esasd.13) 
 • Lateral Torsional Buckling analysis (esasd.14)   

Steel Detailer

 • Steel overview drawings (esadt.01) 
 • Detailled connection drawings (esadt.02)   

Concrete Designer

 • Reinforced concrete beams and columns analysis (esacd.01.xx) 
 • Reinforced concrete Plates and Walls (esacd.02.xx) 
 • Punching check for plates (esacd.03.xx) 
 • EN 1992-1-1 prestressed beams check (esacd.04.01) 
 • Hollow core slabs code check EN 1168 (esacd.06) 
 • Fire resistance check EC2 (esacd.07)

One Dialog 

 • SCIA.ESA One Dialog basic module (esaod.00)

Allplan 

 • Allplan Steel Design Templates (apesa.01)      

Concrete Detailer 

 • Input of the CAD reinforcement for Beams and Columns (esacdt.01) 
 • Practical reinforcement on 2D members (esacdt.03)    

Timber Designer

• Timber code check for EC5 (esatd.01.01)